Free shipping from 150€* over 1.1 Mio. satisfied customers E-Mail: home@it-tronics.de Free hotline +49 (0) 9099 99880 10
Go to homepage
0 €0.00*

Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations

Skip image gallery
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations
Lumonic VDE Side Cutters 1000V Heavy-Duty, 160 mm - For soft, medium-hard, and hard wire, 60CrV steel, two-component handle, for electrical installations

Available, delivery time: 1-3 days

Article-No.: IT-011557
Shipping weight: 0.275 kg
Shipping Zone: 50

€7.00

(€0.00* / )
Content: 1 Stück

Stk
detail.currentStock
Product description
✔ CUTS THROUGH ANY OBSTACLE: The power-assisted joint reduces the amount of manual force required by about 35 percent. Soft, medium, and hard wire all give way with a single pull.
✔ INSULATION IN ACCORDANCE WITH IEC 60900: Rated voltage 1,000 volts, VDE and GS marks. The insulation withstands a tensile force of 500 newtons and a cold test at minus 40 degrees.
✔ FOR DISTRIBUTION PANELS AND CONTROL CABINETS: Cut wires to length, trim cable ties, and cut wire: soft wire up to 2.8 mm, hard wire up to 2.0 mm. The induction-hardened cutting edge remains sharp.
✔ WHAT YOU SHOULD KNOW: Insulated tools are a secondary safety measure, not the primary one. Always check that the equipment is de-energized before working on it. Insulation with nicks or cracks must be discarded.
✔ DETAILS AT A GLANCE: Overall length 160 mm, cutting edge 58 to 65 HRC, body 44 to 48 HRC, 60CrV and chrome-molybdenum steel, two-component handle per BS EN IEC 60900