Lumonic Immersion sleeve V2A stainless steel 3/4 inch | 200mm Installation length | Perfect fit for 6mm temperature sensors | for buffer storage, heating, solar + smart home
Available, delivery time: 1-3 days
Article-No.:
IT-010989
Shipping weight:
0.099 kg
Shipping Zone:
50
| Quantity | Unit price |
|---|---|
| 1 - 10 |
€5.00*
|
| 11 - 20 |
€4.90*
|
| 21 - 50 |
€4.80*
|
| 51 - 100 |
€4.75*
|
| 101 - 200 |
€4.70*
|
| From 201 |
€4.65*
|
Product description
| ✔ PROTECT & EASILY REPLACE SENSORS: A thermowell protects your expensive sensors from mechanical damage, moisture and corrosion. The biggest advantage: In the event of a defect or calibration, you can replace the sensor in seconds. Without switching off the heating or draining the water. |
| ✔ : Your temperature sensor (such as DS18B20, PT1000 or PT100) sits perfectly in the sleeve. Cleanly deburred, so no jamming when inserting. With a plastic cable gland for strain relief. Professional tip: Use heat-conducting paste for more precise measured values without air between the sensor and sleeve (not included). |
| ✔ 100% STAINLESS V2A STAINLESS STEEL: Designed for temperatures from -20°C to +200°C. Perfectly suited for heating water, glycol mixtures (frost protection) or pool heating (fresh water). Important note: Not suitable for salt water or pools containing chlorine. |
| ✔ EASY TO INSTALL - FOR PROFESSIONALS & DO-IT-YOURSELFERS: Standard 3/4 inch external thread with wide wrench flat for easy screwing in with pipe wrench or open-end wrench. Sealing with hemp or Teflon tape. The maximum installation length is 200mm. |
| ✔ VERSATILE IN USE: Compatible with all common heating system manufacturers. Ideal for buffer tanks, fresh water stations, solar thermal systems and DIY smart home projects. You will receive 1 piece of V2A immersion sleeve with an installation length of 200 mm, 3/4 inch thread and an inner diameter of 6 mm. |
