Skip to main content Skip to search Skip to main navigation
Free shipping from 150€ over 1.1 Mio. satisfied customers Online retailer from BAVARIA Free hotline +49 (0) 9099 99880 10

Heat-shrink end cap with adhesive 35 -> 18mm black Ratio 3:1 cross-linked polyolefin Shrink cap for cables, pipes and ropes

Product description
✔ PERFECT SEALING AND INSULATION: The additional adhesive on the inside, which liquefies during shrinking, ensures a watertight seal and perfect sealing. The shrink ratio of the end cap is 3:1.
✔ UNIVERSALLY APPLICABLE: The shrink sleeve end caps are not only suitable for insulating cable ends. They prevent the ends of ropes/wire ropes from fraying and serve as edge protection for pipes or prevent the ingress of dirt.
✔ PRODUCT FEATURES: Made from cross-linked polyolefin, the shrink-on end caps have an operating temperature of -55°C to +110°C and are UV-resistant.
✔ SIMPLE APPLICATION: 1. place the end cap over the cable, pipe or rope, 2. shrink evenly from all sides with a hot air dryer at approx. 120°C while turning, 3. check for correct fit and bonding -> done.
✔ SCOPE OF DELIVERY: You will receive one sales unit of the heat-shrinkable end cap - the product photo is a symbolic image. The end cap is 89mm long, has an inner diameter of 35mm and can be shrunk down to 18mm. The wall thickness of the black shrink cap is 3.3mm when shrunk.
Technical specifications
Length: 0,089m
Presentation: loose
Shrinkage rate: 3:1
Colour: Black
Inner diameter before shrinkage: 35mm
Inner diameter after shrinkage: 18mm
Adhesive: with Adhesive
Material: Cross-linked polyolefin
Wall thickness after shrinkage: 3,3mm
Flame retardant: Yes
Operating temperature: -55°C...+110°C
Minimum shrink temperature: +120°C

Ihr Produktverlauf

SLT30-24VFC-UN 30W 24V 1,25A LED power supply Transformer Driver IP67
€25.00* incl. VAT plus shipping costs
Starting / Motor Capacitor 3µF 400V AC RM37,5 C246OAA4300CD9M 3uF
€3.90* incl. VAT plus shipping costs