Heat-shrink end cap with adhesive 25 -> 8,5mm black Ratio 3:1 cross-linked polyolefin Shrink cap for cables, pipes and ropes
Available, delivery time: 1-3 days
Article-No.:
IT-007254000432
Shipping weight:
0.008 kg
Shipping Zone:
50
ROHS:
Ja
Product description
| ✔ PERFECT SEALING AND INSULATION: The additional adhesive on the inside, which liquefies during shrinking, ensures a watertight seal and perfect sealing. The shrink ratio of the end cap is 3:1. |
| ✔ UNIVERSALLY APPLICABLE: The shrink sleeve end caps are not only suitable for insulating cable ends. They prevent the ends of ropes/wire ropes from fraying and serve as edge protection for pipes or prevent the ingress of dirt. |
| ✔ PRODUCT FEATURES: Made from cross-linked polyolefin, the shrink-on end caps have an operating temperature of -55°C to +110°C and are UV-resistant. |
| ✔ SIMPLE APPLICATION: 1. place the end cap over the cable, pipe or rope, 2. shrink evenly from all sides with a hot air dryer at approx. 120°C while turning, 3. check for correct fit and bonding -> done. |
| ✔ SCOPE OF DELIVERY: You will receive one sales unit of the heat-shrinkable end cap - the product photo is a symbolic image. The end cap is 75mm long, has an inner diameter of 25 and can be shrunk to up to 8.5mm. The wall thickness of the black shrink cap is 2.8mm when shrunk. |
Technical specifications
| Length: | 0,068m |
|---|---|
| Presentation: | loose |
| Shrinkage rate: | 3:1 |
| Colour: | Black |
| Inner diameter before shrinkage: | 25mm |
| Inner diameter after shrinkage: | 8,5mm |
| Adhesive: | with Adhesive |
| Material: | Cross-linked polyolefin |
| Wall thickness after shrinkage: | 2,8mm |
| Flame retardant: | Yes |
| Operating temperature: | -55°C...+110°C |
| Minimum shrink temperature: | +120°C |
Ihr Produktverlauf
SMD Elko Capacitor 470µF 16V 105°C 10x10mm RVJ-16V471MH10U-R 470uF
€0.20*
incl. VAT
plus shipping costs
Thermal switch 180°C NO contact 250V 10A Temperature switch thermostat KSD301 Bimetal Thermal protection
€2.60*
incl. VAT
plus shipping costs
